• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Tower Project......

Wiskey Delta-40

W9WDX Amateur Radio Club Member
Oct 18, 2011
468
65
38
Bradshaw Mtns Arizona
Just got back with I think was a good find.... 40 foot Rohn for a $100..... Might see about getting the 2 lower sections to get another 16 foot, But I think this may do me for now for my 5 element tri-bander.. Need to find rotor and controls now.......
 

Attachments

  • IMAG0379.jpg
    IMAG0379.jpg
    92.7 KB · Views: 226
  • IMAG0380.jpg
    IMAG0380.jpg
    64.1 KB · Views: 241
  • IMAG0381.jpg
    IMAG0381.jpg
    80.5 KB · Views: 228

. . . Or just add a strong section of mast 10 ft above the tower, since the rotor will be mounted in the tower anyway. That should be sufficient for any tri-bander (10m-15m-20m) beam @ 50 ft and still have a fine low angle of radiation.

IMO, since it is already more than a wavelength over the ground surface, it is alredy more than enough for a low angle of radiation for 11/10m . . .
 
  • Like
Reactions: 1 person
Yes very close to Delhi DMX towers. I got a 40' thats the same up now and a 48' sitting in the barn for future use. Around my next of the woods they are free or very cheap if you take them down.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ COWBOYS:
    Denton GL 1000 ham amp comes on, but will not key up
  • @ COWBOYS:
    What can I do to make my Denton GLS 1000 amp to load ?
  • @ AudioShockwav:
    Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
  • @ iw7ed:
    hello