The Emperors are on hold until I get new drivers and finals..
Im working with a TRC451 which was given to me and it was really messed up..so far I have fixed the RX section pretty much accurate possible with no osc, just a sdr and a TinySa as a signal generator..
this radio has a missing choke, that goes to the base of the driver, I installed a very old choke, I dont know if that would work..
Ok..this is the problem..
Upon the 451 Service Manual, the predriver T40 should have certain voltages but I get other..looks like it not conducting..but I do get a 27.015 Ch 5 signal as selected at TR41 which I think its a mixer buffer..Im seeing that signal on the SDR..Im including some pics..
I want this radio to work..Its a good 40 SSB and best of it , its small..fits in my car glove compartment..I really dont care about big radios, this one I would love to use as my daily driver..
Im working with a TRC451 which was given to me and it was really messed up..so far I have fixed the RX section pretty much accurate possible with no osc, just a sdr and a TinySa as a signal generator..
this radio has a missing choke, that goes to the base of the driver, I installed a very old choke, I dont know if that would work..
Ok..this is the problem..
Upon the 451 Service Manual, the predriver T40 should have certain voltages but I get other..looks like it not conducting..but I do get a 27.015 Ch 5 signal as selected at TR41 which I think its a mixer buffer..Im seeing that signal on the SDR..Im including some pics..
I want this radio to work..Its a good 40 SSB and best of it , its small..fits in my car glove compartment..I really dont care about big radios, this one I would love to use as my daily driver..