• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Tx frequency adjustment pot on Cherokee cbs1000

Harley3315

Well-Known Member
Oct 22, 2015
229
31
58
44
Anyone now what pot adjust the tx frequency I'm aware that rv50 centers the clarifier but my hop is there is also one to adjust tx frequency on the main board it self.
 

You saw that procedure?
 
You saw that procedure?
Thanks' for the link I do now so there is no vr to adjust the tx frequency independent of the cans From what I just saw there like say a Washington or 148 vr5 or v3 I think it was on those. That just confirms what I suspected.
 
  • Like
Reactions: sp5it
The point of this exercise was to see if a vfo wind up could be added cause that's all the rage these days. but from what I see that's a no go. And I know everyone thinks they are dumb but that's what lots of people want now so it is what it is and a moot point now.
OK, I was just pointing out the frequency adjust points... L39, L40, L41.
I don't know of any radio that uses a VR for the frequency adjustment, they are all can style capacitors.
 
OK, I was just pointing out the frequency adjust points... L39, L40, L41.
I don't know of any radio that uses a VR for the frequency adjustment, they are all can style capacitors.
The Washington 148 style radios have a vr to adjust the tx frequency slightly which is where you can tie in on the center wiper with a cap to do the vfo wind up as long as the radio isn't strapped or unlocked.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.