just noticed the mike gain knob pulls out and in just like a switch and it says mike gain and anf not sure what anf stand for when I push it in the static gets louder when pushedin the static gets deeper and ideas?
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
The Winners of the three Retevis radios 16 Anniversary giveaway are announced!! Click Here to find out if you won!
whats anf on ranger 696fd1?
- Thread starter sanjosebay21
- Start date
Think it is the same as the 'GNF' or 'Galaxy Noise Filter' of the Galaxy DX-959.
Supposed to change the signal-to-noise ratio
In the "GNF" mode,
you are in CB operation but the Galaxy Noise Filter (GNF) is engaged.
This is a special noise filter that de-emphasizes audio high frequency
response in order to increase the signal-to-noise ratio of weak signals.
While you will notice a dramatic reduction in the "rushing" sound when
this filter is activated, it does not have much effect on the signal-to-noise
ratio of strong signals.
http://www.cbtricks.com/radios/galaxy/dx959/graphics/om_dx959.pdf
Supposed to change the signal-to-noise ratio
In the "GNF" mode,
you are in CB operation but the Galaxy Noise Filter (GNF) is engaged.
This is a special noise filter that de-emphasizes audio high frequency
response in order to increase the signal-to-noise ratio of weak signals.
While you will notice a dramatic reduction in the "rushing" sound when
this filter is activated, it does not have much effect on the signal-to-noise
ratio of strong signals.
http://www.cbtricks.com/radios/galaxy/dx959/graphics/om_dx959.pdf
