Where to find this cable

[HomerBB]

I'm wanting a RJ45 to RJ45 repeater controller cable for the QYT KT-8900D pre-made. I don't want to make one. I want to buy one. I make antennas, not rj45 cables. Surecom offers an RJ45 to 3.5mm speaker mic cable, but I want to pair two mobiles, not a mobile to HT for crossband use.

 

[w9cll]

Standard cat 5 network cable should work. Amazon has then.

 

[HomerBB]

I think your right... it should be pin to pin...
But, this confuses me:
"

• Wire the cable according to the standard crossband repeater pinout: Pin 1 (Data In) to Pin 7 (AF Out), Pin 2 (PTT/COS) to Pin 8 (PTT/COS), and Pin 3 (Mic Ground) to Pin 5 (Mic Ground). Do not connect Pin 1 and Pin 7 directly; they are separate signal paths."

Doesn't look like pin-to-pin.

 

[N8YX]

Look for a dual female RJ45 breakout box. Hook a straight-though cable to either side then jumper the crossovers via the connector blocks.

 

[BJ radionut]

QYT KT8900 and KT8900D repeater system - DW1ZWS - Panda Antenna

QYT KT8900 and QYT KT8900D and variants affordable repeater system. Suitable for light usage and quick deployment scenario to extend portable radio range

dw1zws.com

https://down-my.img.susercontent.com/file/my-11134207-7r98v-lszso344rqif01

Sorry Homer ...nobody sells these...the color code for RJ45 connector are specific...color wire to correct pin...I think when I first started messing with CAT 5 cable...we ran into issues and had to "make" a "crossover" cable(on occasions)...I had to made diagrams/laminate them and kept in my "IT" go box at the stadium (cheat sheets for various configs)...The color of the wire and specific pin designation were critical...been to long ...I'm old!...
I still have my crimp tools!!!! I know no help again

 

[HomerBB]

Thanks. I'll look it over.