Which wire goes where?

[hossless]

I have an Omegaforce s45 and I need to solder the stock mic to the plug. Which wire goes where? I took off the 636 I had on there and went to replace with the stock mic and realized the up down buttons and the +13.8 VDC need to be connected. So instead of only 4 wires that need to be connected I have 6 on the stock mic.



Somebody Help Me!!!<img src=http://home.comcast.net/~shockwav/smiley_155.gif ALT=":jmpnsmly"> Thanks, Hossless<img src=http://users.joplin.com/dutch64804/icon95.gif ALT=":jumpy">


</p>

 

[jp1116]

If you haven't figured it out yet, you might call RF Limited they are usually real helpful. 1-877-624-6869


</p>

 

[Sonwatcher]

Hossless,

This is the standard Mic pinout for the 6 pin magnum radios.



Pin 1 : Microphone Audio

Pin2 : Receive

Pin 3 : Transmit

Pin 4 : Down (Up w/ 22K Ohm Resistor)

Pin 5 : Ground

Pin 6 : +13.8 VDC

</p>

 

[Lazybones1222]

Welcome back Sonwatcher.



Lazy back quiet.

</p>

 

[Sonwatcher]

Hey Lazy,

It was good to talk to you ! That Grantxl sounded clean. Real nice audio !<img src=http://users.joplin.com/dutch64804/posticon51.gif ALT=":51">

</p>