• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Winter Wonder

HomerBB

Sr. Member
I Support WorldwideDX.com!
Jan 4, 2009
4,014
2,812
273
69
Rogers, Ar
This is my first time to have seen this in nearly 70 years. The snow accumulation on top of our glass deck table slightly melted in yesterday's warm up due to the sun warming the surface of the table, and when the melt refroze last night a layer of ice between the glass table and the snow began sliding the snow off the table at a very slow rate of movement. Look at it at 11:00 AM this morning. Cool!
 

Attachments

  • 20260128_105357.jpg
    20260128_105357.jpg
    2 MB · Views: 64
  • 20260128_105341.jpg
    20260128_105341.jpg
    1.8 MB · Views: 56
  • 20260128_105329.jpg
    20260128_105329.jpg
    1.9 MB · Views: 60
  • 20260128_105306.jpg
    20260128_105306.jpg
    1.9 MB · Views: 61

This is my first time to have seen this in nearly 70 years. The snow accumulation on top of our glass deck table slightly melted in yesterday's warm up due to the sun warming the surface of the table, and when the melt refroze last night a layer of ice between the glass table and the snow began sliding the snow off the table at a very slow rate of movement. Look at it at 11:00 AM this morning. Cool!
I do believe your table is unlevel lol.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.