• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Yaesu 101e


Good luck with the 101E, Nice radios. I've had a 101EX and a 101ZD in the past. Fun stuff.

You do already have the AM filter right? Cause no shop or retail outlet is going to have them.

You can find them on ebay sometimes....be prepared to pony up over $100 for one no matter where you can find one.
 
Turner Radio:
42541 6th Street East Suite 8 Lancaster, Ca. 93535.
M-F 10am-5pm Pacific Time
(661) 945-9097

http://www.eham.net/reviews/detail/1705


I know several people that have used this shop to repair rigs and have been very happy with the service. He also does mail-in work.
Thanks Mole. I will check them out. I already have the AM filter. I am also going to check ebay for the frequency counter.
 
Good luck with the 101E, Nice radios. I've had a 101EX and a 101ZD in the past. Fun stuff.

You do already have the AM filter right? Cause no shop or retail outlet is going to have them.

You can find them on ebay sometimes....be prepared to pony up over $100 for one no matter where you can find one.

FYI for anyone who looks at this thread, you can still get filters for the FT-101's and a bunch of other classic and modern radios from International Radio.

International Radio
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.