Yaesu FL-2100B 12 Meter modification

[Crambone]

guys I’m looking at this mod but I’m not sure what the swr bridge is? Is this like a sample point? Any idea how to make one or use one of my existing sample points I have?
http://www.radiomods.co.nz/yaesu/yaesufl2100.html

 

[Dmans]

Crambone,
An SWR bridge is another term for an SWR meter. The text is having you check the input from your radio through the 10 meter tuning coil. Best results are had by terminating the amplifier into a dummy load.
(Probably not a bad idea to check the tune in all band positions while at it.)

73
David

 

[Crambone]

Crambone,
An SWR bridge is another term for an SWR meter. The text is having you check the input from your radio through the 10 meter tuning coil. Best results are had by terminating the amplifier into a dummy load.
(Probably not a bad idea to check the tune in all band positions while at it.)

73
David

OK that makes sense I was reading into it too far.
Thank you for clarifying

 

[nomadradio]

You need to set the front-panel Tune and Load controls for max peak power before adjusting L206 for minimum input-side SWR.

73

 

[Crambone]

You need to set the front-panel Tune and Load controls for max peak power before adjusting L206 for minimum input-side SWR.

73

Ok thank you it’s going on my bench Friday hopefully