Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Yaesu FT-950 Extended TX Mod

Moleculo

Moleculo

Ham Radio Nerd
Apr 14, 2002
9,322
2,015
383
  1. Write down all your settings because they will all be lost after 'CPU Reset'
  2. Turn the radio over and take off the back cover. Locate the control board (Right front corner) you will see 9 jumpers, marker 1 through 9. add a Solder bridge to pad number 5 . See the attached picture for details
  3. Reassemble the radio.
  4. Do a Full Reset by holding the "FAST" and "LOCK" buttons in while pushing the "POWER" switch to ON.
The TX range is now 1.8-30Mhz and 50-54Mhz.
 

Attachments

  • 3950_FT-950_mod.jpg
    3950_FT-950_mod.jpg
    42.4 KB · Views: 2,198

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom