YAESU VX-7R TECH QUESTION

[darticus]

YAESU VX-7R TECH QUESTION
I Noticed that on my main channels I have programed in 1-36 but on my sub channels I'm missing some of these channels like 3 and 12 of the 36. The channel numbers are missing. It goes from 2 to 4 etc. Yaesu says masking page 50 in the manual might be the answer but it doesn't seem to correct the missing channels numbers. Seems like if it was masked it would be masked on main channels also. Anyone able to help me. I don't want to reprogram the radio from scratch. Thanks Ron

 

[Shockwave]

Channels 3, and 12 must be programmed with frequencies well outside of the normal ham bands and can only be heard on the main VFO, not the sub VFO. Only the main VFO is connected to the general coverage receiver that can receive bands like 800 Mhz. or below 50 Mhz. The sub VFO has limited band coverage.

 

[Tommy GW]

Is th

Channels 3, and 12 must be programmed with frequencies well outside of the normal ham bands and can only be heard on the main VFO, not the sub VFO. Only the main VFO is connected to the general coverage receiver that can receive bands like 800 Mhz. or below 50 Mhz. The sub VFO has limited band coverage.

any one can help how to modify the Sub VFO as same as Main VFO , so the Sub Band can receive general coverage freq like the Main Band .

Many Thanks
Tommy GW.