Cobra 1000 GTL Alignment Procedures?

[Crambone]

I tried all the normal sites and can’t find them anywhere?

 

[loosecannon]

this chassis is based on the 29GTL board and that board is the precursor to the 29LTD that we all know well.

you should be able to use that alignment procedure as the boards are pretty much the same.
double check before you make an adjustment because there could be some part number differences.

here is a link to that alignment procedure: http://www.cbtricks.com/radios/cobr...st/graphics/29ltd-st_29wx-st_sm_pg12_pg34.pdf

remember that there is a mistake in the other "factory service manual" link on the cbtricks 29ltd page, and it contains the procedure for the 25 instead of the 29.

the one i linked you to should work.
LC

 

[Crambone]

this chassis is based on the 29GTL board and that board is the precursor to the 29LTD that we all know well.

you should be able to use that alignment procedure as the boards are pretty much the same.
double check before you make an adjustment because there could be some part number differences.

here is a link to that alignment procedure: http://www.cbtricks.com/radios/cobr...st/graphics/29ltd-st_29wx-st_sm_pg12_pg34.pdf

remember that there is a mistake in the other "factory service manual" link on the cbtricks 29ltd page, and it contains the procedure for the 25 instead of the 29.

the one i linked you to should work.
LC

Thank you I will look at that tomorrow

 

[nomadradio]

President Dwight D may be close.

[URL]http://www.cbtricks.com/radios/president/dwight_d_new/index.htm[/url]

Seems to me the physical layout is different.

The callout numbers might be, as well.

If you can find alignment info for the Cobra 89GTL, it's the same radio on the inside. CB Tricks has only the schemo for it.

73

 

[Crambone]

Ok thank you guys!

 

[Lkaskel]

I tried all the normal sites and can’t find them anywhere?

Did any of this info help you? I just picked up a 1000 and don't you know, out of the 150 Sams manuals I have I do not have 235.....

 

[loosecannon]

I tried clicking on Nomad's link and it didn't work so here is a link to the Dwight D page on CBT.
http://www.cbtricks.com/radios/president/dwight_d_new/index.htm

I have just compared the alignment procedure to the schematic of the 1000GTL and it will indeed work.
LC

 

[Dmans]

All,
See the photos below.




Need More?

73
David

 

[Lkaskel]

All,
See the photos below.
View attachment 32604
View attachment 32605
View attachment 32606

Need More?

73
David

Thanks so much David!!! Maybe the page with the locations of the TP's and such?

 

[Crambone]

Thanks so much David!!! Maybe the page with the locations of the TP's and such?

Sorry just seen this but seems you have it now.

 

[Dmans]

Sure. No problem.

73
David

 

[Lkaskel]

View attachment 32618

Sure. No problem.

73
David

That was very kind of you!!!! Want to stop by and align it with me?
Thanks again David!!!

 

[ElectrofryingD]

Awesome thanks! I needed this for an 89GTL.
Is there a "Truth Chart" in that SAMS you can post?
...for the other frequencies, is it page 4?

 

[Dmans]

...for the other frequencies, is it page 4?

Not sure what the above means??

 

[Dmans]

Here is page 4 of Sams CB-235.

Here is the Truth chart for the 89GTL and 1000GTL.


73
David