-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Cobra 1000 GTL Alignment Procedures?
- Thread starter Crambone
- Start date
this chassis is based on the 29GTL board and that board is the precursor to the 29LTD that we all know well.
you should be able to use that alignment procedure as the boards are pretty much the same.
double check before you make an adjustment because there could be some part number differences.
here is a link to that alignment procedure: http://www.cbtricks.com/radios/cobr...st/graphics/29ltd-st_29wx-st_sm_pg12_pg34.pdf
remember that there is a mistake in the other "factory service manual" link on the cbtricks 29ltd page, and it contains the procedure for the 25 instead of the 29.
the one i linked you to should work.
LC
you should be able to use that alignment procedure as the boards are pretty much the same.
double check before you make an adjustment because there could be some part number differences.
here is a link to that alignment procedure: http://www.cbtricks.com/radios/cobr...st/graphics/29ltd-st_29wx-st_sm_pg12_pg34.pdf
remember that there is a mistake in the other "factory service manual" link on the cbtricks 29ltd page, and it contains the procedure for the 25 instead of the 29.
the one i linked you to should work.
LC
President Dwight D may be close.
[URL]http://www.cbtricks.com/radios/president/dwight_d_new/index.htm[/url]
Seems to me the physical layout is different.
The callout numbers might be, as well.
If you can find alignment info for the Cobra 89GTL, it's the same radio on the inside. CB Tricks has only the schemo for it.
73
[URL]http://www.cbtricks.com/radios/president/dwight_d_new/index.htm[/url]
Seems to me the physical layout is different.
The callout numbers might be, as well.
If you can find alignment info for the Cobra 89GTL, it's the same radio on the inside. CB Tricks has only the schemo for it.
73
Did any of this info help you? I just picked up a 1000 and don't you know, out of the 150 Sams manuals I have I do not have 235.....
I tried clicking on Nomad's link and it didn't work so here is a link to the Dwight D page on CBT.
http://www.cbtricks.com/radios/president/dwight_d_new/index.htm
I have just compared the alignment procedure to the schematic of the 1000GTL and it will indeed work.
LC
http://www.cbtricks.com/radios/president/dwight_d_new/index.htm
I have just compared the alignment procedure to the schematic of the 1000GTL and it will indeed work.
LC
That was very kind of you!!!! Want to stop by and align it with me?
Thanks again David!!!
Awesome thanks! I needed this for an 89GTL.
Is there a "Truth Chart" in that SAMS you can post?
...for the other frequencies, is it page 4?
Is there a "Truth Chart" in that SAMS you can post?
...for the other frequencies, is it page 4?
Here is page 4 of Sams CB-235.
Here is the Truth chart for the 89GTL and 1000GTL.
73
David
Here is the Truth chart for the 89GTL and 1000GTL.
73
David
- No one is chatting at the moment.
-
-
dxBot:63Sprint has left the room.
-
dxBot:kennyjames 0151 has left the room.
-
-