• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Bearcat 980ssb clarifier unlock mod

Hi guys,
I have one of these rigs, it's a first version, with the SWR board that stands up near back of the unit, You know, the one with the middle screw through the three holes in the back of the chassis?
Does anyone have a clarifier unlocking mod for this unit?
Also, does anyone have a schematic on this particular model.
I've looked over YouTube nothing there I've searched Google nothing there..

Thanks,
Kevin Rea
Lancaster california USA
K6REA
 
Last edited:

Hi guys,
I have one of these rigs, it's a first version, with the SWR board that stands up near back of the unit, You know, the one with the middle screw through the three holes in the back of the chassis?
Does anyone have a clarifier unlocking mod for this unit?
Also, does anyone have a schematic on this particular model.
I've looked over YouTube nothing there I've searched Google nothing there..

Thanks,
Kevin Rea
Lancaster california USA
K6REA
https://www.worldwidedx.com/threads/clarifier-mod-for-bearcat-ssb-980.177908/
 
Freelance coders for hire… Reverse engineering software is needed. Concept: First photos are taken of the top and bottom of the circuit board. Then component values are added to the top of each part within the photo. The reverse engineering software will then takeover and convert everything into a usable schematic.;)
 
  • Like
Reactions: Shadetree Mechanic
component values are added to the top of each part within the photo. The reverse engineering software will then takeover and convert everything into a usable schematic.

Probably would be cheaper than hiring me to trace it down and draw it up the old-fashioned way. Not that it's worth anyone's while anyway.

And Howard W. Sams Company lost interest 40 years ago.

73
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated