• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Recent content by basstracker1970

  1. B

    GALAXY DX-33HP2

    I bought this radio from a retailer not a shop. Second I found the frequency mod for the channels. On the bottom of the board solder side on the front right side you will see a cluster of resistors soldered together going the the ppl chip. Just remove all of them and bammmm your done converting...
  2. B

    GALAXY DX-33HP2

    Got galaxy dx-33hp2 today freq mod is different from the old 33's anyone know how to do the channel mod on this new radio. Galaxy is of no help.
  3. B

    GALAXY DX-33HP2

    Email sent. We will see what they say...
  4. B

    GALAXY DX-33HP2

    Come on guys I know somebody here has do this mod.
  5. B

    GALAXY DX-33HP2

    Im not sure. I was woundering if it uses the same board as the 33hp radio. I don't have the radio yet so i can't check it.
  6. B

    GALAXY DX-33HP2

    Already did they have nothing on the freq mod for this new radio.
  7. B

    GALAXY DX-33HP2

    CAN SOMEONE PLEASE TELL ME WHAT THE FREQUENCY MOD IS FOR THIS RADIO. THANK YOU.....
  8. B

    Cobra 2000 gtl echo board install help !!!

    Wanting to install trbx3 echo board in my cobra 2000 gtl and have a couple questions. I know pins 2 and 4 are ground so can I use either or both for grounding for the echo board? The instructions shows pins 2 and 4 as ground pins. Also where is the beter place for the 13.8v switched power. Thank...
  9. B

    STRYKER SR-655HP

    Come on guys someone must know the answer here. Please help a guy out here....
  10. B

    STRYKER SR-655HP

    Can someone please tell me where I can find a 8v transmit voltage on this radio. Going to install RFX-150 and need an 8v transmit voltage. Thank you
  11. B

    STRYKER SR-66HP AND RFX-150

    I do know the power of my stock radio. It is swinging 60-70 watts and im just needing to know if that is to much power for the rfx-150 board.
  12. B

    STRYKER SR-66HP AND RFX-150

    I like the idea of it being mounted to the radio instead of a seperate item with another jumper. I just need to know if it will work ok with the stryker 655hp.
  13. B

    STRYKER SR-66HP AND RFX-150

    Could I use the rfx-150 on my stryker sr-655hp or would it be to much drive for it? Thank you....