Sidebar Sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

What is the loudest export radio?

i just got a magnum s680 no tuning straight out of box. replies i get are what kind of radio is that it is crystal clear. they also tell me they have to turn down their volume when i transmit. i had a general lee and im told the magnum does better. am using rk56 and mic gain is 12 oclock and just a hair of echo.
 
If you occupie 3 channels over and under your working channel it has nothing to do with Radiocommunication, we need to have respect for other operating near our working freq also.

Loud is for me as loud as it gets without inerfering nearby channels :)
 
  • Like
Reactions: HamHead
That is just one example of many that give CB or Free-Banding a bad name. Although, you do have the same on the Amatuer Bands in much a less extent. It's all about etiquette and respect. Things will never change. Do you not care about fellow operators or your nieghbors? Because I know if you interfere with them for to long, you may end up caring. I am not bashing you personally, just the mentality of most in general. I have my ticket but I am still a Free-Bander and just can't seem to subscribe to that way of thinking. You can have loud and not splash three channels up and down. Buy type excepted equipment and keep it clean. Just my two cents. CDX126, KI4MSJ
 
I'm partial to my President Grant Classic export. I use a Heil HC-5 Microphone element in the stock hand microphone case, and have good, clear audio with that combination. It is also very loud!
 
I think I will cast my vote for the new "Supercharged" Connex 3300HP with mosfets. I just received one to test out and it sure is loud! :LOL:
 
W1R3T4P said:
300% modulation :LOL:
Click to expand...
.......That was good ;) .........The loudest radio I own is a RCI 2950 (non-DX).....the best sounding is (RX an TX) is my Uniden Grant XL.....not a dual final, but it's loud and clean (modulation limiter intact) I agree with W1R3TP, alot of the exports share the same board.
 
  • Like
Reactions: NZ8N
Those old Connex/Superstar 3300s with there original echo boards in them were some loud SOB's !! But the loudest radio I've ever heard was a HR2510 , that was so loud it would hurt your teeth !! weather I was 5 miles away from him or 25 miles away , that radio had audio out of the gallows of hell !!! but yet I have heard a few cobra 2000s on shure 5-26Ts that might have been the loudest , proudest and cleanest cb radios I've eer heard. Yeap ,also 29s and 25s with knock you out of seat type audio on them, weather or not they were clipped , swing kitted or not , they were just nasty freak'in loud !!
 
Switch Kit said:
Those old Connex/Superstar 3300s with there original echo boards in them were some loud SOB's !! But the loudest radio I've ever heard was a HR2510 , that was so loud it would hurt your teeth !! weather I was 5 miles away from him or 25 miles away , that radio had audio out of the gallows of hell !!! but yet I have heard a few cobra 2000s on shure 5-26Ts that might have been the loudest , proudest and cleanest cb radios I've eer heard. Yeap ,also 29s and 25s with knock you out of seat type audio on them, weather or not they were clipped , swing kitted or not , they were just nasty freak'in loud !!
Click to expand...

LOL ... That's a Good One Switch Kit..( That it was so LOAD it would Hurt your TEETH)..
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Wildcat27:
    Hello I have a old school 2950 receives great on all modes and transmits great on AM but no transmit on SSB. Does anyone have any idea?
  • @ BJ radionut:
  • @ ButtFuzz:
    Good evening from Sunny Salem! What’s shaking?
  • dxBot:
    63Sprint has left the room.
  • dxBot:
    kennyjames 0151 has left the room.


      Top Bottom
      Back