• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Delta Electronics DSP60M for $189 yes or no

Maxafterburn

New Member
Mar 24, 2024
1
0
1
61
So I'm in the market for a power supply for my President Lincoln that I am planning to set up as a base. I see this unit advertised for sale directly for $189 brand new. Then I have seen it advertised used for $150-$325 depending on where you look.

#1-is this a decent power supply?

#2-is the $189 version the real deal or some scam? https://www.deltaelectronicsonline.com/ProductDetails.asp?ProductCode=Delta-DPS60M

Thanks,

Ken
 
Last edited:

Delta is so so, I'd suggest an mfj or jetstream over a delta supply and probably at a better cost. The ones below are plenty to power that president.
Screenshot_20240325_191020_eBay.jpg
Screenshot_20240325_191142_eBay.jpg
Just my own opinion
 

125.00
 

125.00
That's the most preferable if you don't mind getting creative with the power terminals. Really the best bang for your buck. I use one (35 amp) on the experiment/work bench and it's been going for about 5 or 6 years now.
 
  • Like
Reactions: BC Coyote
I am old school and really like my Astron 70m and 35m. If I was going to get something else I would get a Mega Watt, several locals have them and they work great.
 
  • Like
Reactions: codeman
Big Thumbs up for Megawatt. I bought a 36 Amp version. It's tiny, quiet, doesn't create any interference and didn't cost a fortune. It also runs all my gear perfectly. Couldn't be happier.
 
  • Like
Reactions: codeman and wjm1129
That's the most preferable if you don't mind getting creative with the power terminals. Really the best bang for your buck. I use one (35 amp) on the experiment/work bench and it's been going for about 5 or 6 years now.
I currently use 3 of the 50A models because the 50A are made to be ganged without an external current sharing circuit. I use two in parallel for my DX-500 and a single one for my radio.
 
I currently use 3 of the 50A models because the 50A are made to be ganged without an external current sharing circuit. I use two in parallel for my DX-500 and a single one for my radio.
How many amp tops can the dx 500 use?
 
How many amp tops can the dx 500 use?
I've not really checked mine accurately. But, I have a meter that shows about 47A when using SSB. I never use it on AM so I cannot tell you about the dead pull. I've got a clamp-on meter and when I fire it up today I'll hit it hard and get a quick peak on it for you.
 
  • Like
Reactions: Keto

JETSTREAM JTPS60M​


JETSTREAM JTPS75BCMMKII :giggle: (y)

 

dxChat
Help Users
  • No one is chatting at the moment.