Search results

Hello, By any chance do you have a schematic for building a amp using the ERF9530's? I have been looking all over the web trying to find some. My friend and myself have build a couple of transistor amps and a couple of LDMOS amps but of course we had schematics and full parts list. So if you...

Not sure about your HOA, however in mine i mounted my mast and antenna to my 2nd story deck and its been there for years! They can tell me that my FRONT yard grass is a half inch too tall but can not say squat about what i do in the backyard,

Not to say its right but on the manual that came with my Palomar Skipper it says the following After tune and load have been adjusted for maximum and the the rear knob have all been tuned to maximum The amplifier must be over coupled, this is accomplished by talking the load control and turning...

https://store.lesterscustoms.com/co20cldikit.html It might not be the cheapest but it was the first one i found.

Now you have to update us if it fixed his problem.

Welcome to what summers are like in the West.

I see NZ8N has already posted a unit the same or even better than mine, And the one i bought is out of stock the one he linked will do you nicely. Enjoy using it you will no longer worry about replacing parts.

I did this last year to my 2000. Rather than using a cheap vacuum sucker or wick i went on Amazon and bought a 30 watt desoldering electric vacuum solder sucker for around 35 dollars or so and i did all the caps in the radio and It was so EASY with that tool. I have always used the two others...

Just to let you know the last post on this subject is 10 years old. Not that you may not get some responses just a FYI.

Well MANY amps on Ebay get pulled. If they can be used on 11 meters for sure they get pulled. Depending on how the ad is worded hey get pulled unless they are stated ham amplifier and it helps to say not for CB.

The pre-amp amplifies the incoming signals to help pickup weak signals. For most people they normally are of little help but sometimes they are helpful. P.E.P is the output wattage under full modulation/audio, VS your base dead key. This is a very simple explanation.

Thank you for the response, looks like 2 watt is as large as i can find and most of them now are made of cermet. And from what i read is very much like metal film. So i guess i will see how the cermet 2 watt potentiometer works in the application.

Thank you, i knew that i had read that wire wounds were not to be used around RF/radio. Spec is 2 watt but as it has failed my thought was to bump u the wattage just to be safe and i would hope last longer than the failed one. Guess i will stick to the 2 watt ones that were easy to find. As...

Question for those who know more than myself, The variable on the DX667V calls for a 100ohm 2watter. I plan on using a 5 watt version but should i use a regular carbon type or a wire wound? I know that i have read before that under certain uses wire wound should not be used. So do i order...

There is a user here that posted about one he has, You might check with him TetroideTom

I see this often from new members, They click to respond before noticing the date of the post.

Sorry for the delay with my response but had a harddrive crash. Thank you all for the responses i do apricate them all.

So as the title says i just picked up a old Texas Star dx667v and i have a nice new 150amp variable power supply. My question is what voltage should i run it at? If it matters it uses non red dot toshiba's and it seems to run without any problems. It does have a 120mm fan kit installed under it...

Thank you! yes that's what they are, I just went and looked close at the picture and that is what they have done. Strange but i think i will skip these. I do have plenty of new ones but always look for spares. As always thanks guys for the fantastic information,

Hello I have a bunch of old tube gear and am always looking for spare 6KV6 tubes. I have probably 18 of them from most manufactures and NONE of them have a grid/anode cap on top. Now i found a guy selling a pair but they have the cap on top and i am confused? They are marked 6KV6A ? Is this a...