Search results

THANK YOU FOR YOUR ADVICES IT IS NOT THE EASIEST WAY BUT BUILDING AN ANTENNA FOR THE 40 METER WILL BE THE BEST WAY 73 TO ALL

II use a ft1200dx an antenna 10/15./20 possible to work on 40 meter with a tuner MFJ (manual) which problems ? thank you for reply on3bm

rig ft1200dx mode fm rx :29.600 pushing ptt freq jumps to 26.500 I read the "book" ( tone off etc) but don't see how to maintain the 29600 on rx and tx now with a split i set 29600 to 29600 which steps i have to do to have simplex 29600 thank you for your attention and help on3bm

what do i wrong settings yaesu2000 and scu-17 for wspr settings audio in usb audio codec auio out usb audio codec power 33 ptt rts ptt port com 8 x enable cat com port 7 yaesu ft2000 send rate 38400 data bits 8 stop bits 2 settings in rig ok i see tx working rx no registration settings pot...

WSPR dear friends My equipment FT1200dx Interface scu-17 (yaesu) download drivers port7 installed port8 installed cat cable (transceiver - scu-17) cable 6pin (transceiver-scu-17)...

like to read something about the construction, a shield to protect radioamateurs from radiation ( linears etc) some cage of Faraday thank you on3bm

solution to have the input mic/tx free and send audio from pc to the TX signaLink connect the pins in the jumper in the right way (see tigertronix signaLink) connect cable data tx to signaLink power signaLink via usb pc for ft1200 dx cable 6pin SL6PM jumper sl mod6pm or connect by...

dear Knights in the Ham i bought the cable sl6pm cable(tigertronics) when i use the 8 round pin cable /the input mic tx/ the signaLink /audio from pc /there is no problem when is use the 6 pin cable (sl6pm)/ input data (rear tx ft1200dx) no audio to transceiver from pc (led on signaLink is on...

i use a ft1200dx i received this information a tigertronics cable sl-cab6pm into the data (back tx) will do the job another message build a Y and use a 4 pole double throw switch into a box can someone give confirmation by experience thank you wish every one who read this thread a 73 happy new...

can I use the mic when the input transceiver (dx) is used by a SignalLink. Can I split audio/ground/ptt to audio/ground/ptt SIGNALLINK and audio/ground/ptt/ MIC and by switch( ex) using on turn one or another device or is there another way (audio mp3 and voice mic) thank you for attention , help...

i know how to hook the ARB-704 -FT891 - and the linear but where and who put i the FC-50 (100w) thank you for some diagram 73

dear friends Can I use the cable I hook a FT1200dx to an Ameritron ( linear operations) to hook a FT891 ( is there an output for a 8 pin) also to an Ameritron or do i need another cable thank you for reply and help ON3BM

thank you for your attention and advice On3BM

in the manual Kenwood I read about the connection to a amplifier Normaly it is off is there someone who can tell me if the pin (left) i see is the ON in the picture i think the white wire has to connect somewhere but I don't see where is this ON thank you to let me see the light picture one ...

dear hams , Can I use HRD 6.3 with Ft1200dx /w10 / scu-17 with voice as hrd wrote nor all rigs are compatible (psk etc no problems) I tried (settings headphone -voice- ptt (f4) works but no audio rx/tx thank you for reading and advice 73 on3bm

dear friends when i buy the signalink usb to use with FT1200dx i think i had to mention jumper SLMOD8RY cable SLUSB8R cable SLUSB6PM (rear Rig to SIGNALINK) Do i need other cables or other things Thank you to verify so I avoid to command a second time 73 ON3BM

Use RemoteHams Server/Client needs port 4524,4525 Norton open Bbox3 ( router) Proximus -Belgium blocks no way opening those ports solution TP-link behind Bbox3 Hope Tp-link more "friendly" about closed ports like to have advice on a Tp-link (wired) thank you for advice ON3BM

My remotesystem is workink and the RX is OK (Thanks fourstring) Can I have some help with the TX (PTT) FT1200dx/ Footswitch usb/hrd/ scu-17/REmAud/ I have the Mic cable (ft) one end blanc and know the funtions of the Pins(mic) How do I hook the Laptop ( remote client ) to the server / the...

I thank everybody who gives some help Finaly I "saw the light" System is working 73 ON3BM

I Thank everybody who gives some help Finaly I "saw the light" system is working 73