Search results

Frankly speaking (IC-7610) only OVF issues I had sporadically with OTH radar transmitting on nearby frequency, or while listening BC band with huge, over +40dB signals. In that case 6dB att does the trick. But first: https://www.qsl.net/ab4oj/icom/ic7610/gainmgmt.html I run high gain, narrow...

Only if you do not know how to use direct sampling SDR :) Mike

I usually replace dynamic with electret. Resistor/cap inside radio and problem solved. Mike

Maybe someone live nearby? https://www.qrz.com/db/KI5AYC

Aliexpress. Amazon, ebay too expensive for the same gear. Mike

I would check +5V leg 6 and 33 of IC502

All elements equally faded?

How you gonna control CC/CV stages? Better get proper charger. Mike

It is a tuned coil. You have to open it, count turns, then rewind with the same wire size.

From another radio. I would try to rewind it if not massacred too much. Mike

Congratulations. Always a thrill when working new one. Mike

NPC is done in different radio area.

530's are better, but if you have 520 just replace.

Is someone really buying that? Mike

48cm of wire for a start? Mike

vr5

Want CB renaissance? Kill internet and cell phones. Voila. 11m would be as busy as before. Mike

Traffic seem to be bigger, because of good propagation. But CB is dying. Slowly and boringly. In Poland I can listen road channel for days, almost all the time quiet. No cars with antennas, nor on homes. Mike

Ground distance influence on quad is totally different than for a Yagi.

Chickenbander in price range of ham rig? I pass