Search results

Do you have a manual or schematic for it? If not, you can download them here: https://web.archive.org/web/20210302170832/http://cbtricks.com/radios/tram/d201a/index.htm. There are board diagrams in the manual that will help you identify the parts. Looks as though most of the resistors that...

I've done that many times over the years for people. They just have to realize they won't have channel 39. Only 36,37,38,and 40 unless they want to somehow add the extra 4 MHz crystal that the 40 channel radio has.

Here's a NY Times article from 4/28/1983, the day the FCC ended CB licensing. https://www.nytimes.com/1983/04/28/us/fading-cb-craze-signals-end-to-licensing.html

In the 60s, Wolfman Jack from the "X" just over the border from Del Rio.

This may help you. Many I have worked on just need new gears.

I have that problem here in NYS. NY bans all kinds of stuff from being shipped in, so I just use a friend's address over the border in PA and have it shipped there.

Here ya go.

Are you sure it's the display segments and not the resistors.

Right. Everyone around here back in the fifties and sixties also had the white dishes with the outer colored edge. I think blue was the most popular, but they also had green, yellow, and red. Everyone also had the Peyrex cookware. There was a Corning kitchenware store in downtown Corning.

Ah, I understand. Corning, NY is only a few miles from here. Corning Glass headquarters are here, as well as their research department and a cellular-ceramic substrate plant. Many people in this area have worked for Corning over the years. It's the biggest industry in this area, but used to...

Steuben glass was made in Corning, NY.

Lou Franklin called his compressor that he sold a DSP (Dynamic Speech Compressor) which always got confused with Digital Signal Processors.

And the majority of hams today used to be and still are CBers.

Tramdr didn't post that, I did. Here's the manual that I also posted with those others about a year ago.

No one mentioned an audio generator. You're going to need one to align the transmit section.

Knowledge is the most important thing you need. Without that, you will never be able to do repairs quickly and efficiently or understand how to use the test equipment properly. There is a lot more to electronics than most people realize, thus the need for a formal education in it. The equipment...

Just remember, like others said, cameras are everywhere today.

Could be quite a few things in a radio that old. The early Cobra 138XLR and 139XLR had some issues, and bulletins were put out on them for the fixes. They can be found on CBtricks. Since it's been going this long and all you have is an output issue, it could be the final rf transistor has failed...

I thought that was the size they were supposed to be. Like I said, 36 threads per inch is an odd size, but that is what is in this radio. I suppose someone changed them out at one time.

According to my thread gauge, they are #8-36x1/2" Phillips flat head. I'm not positive they are original, but all 8 are in it, and they thread in and tighten up just fine. 36 threads per inch is an odd size, but that is what these are. There is also a decorative finishing washer under each one...