• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • A Winner has been chosen for the 2026 July 4th Retevis RA89R Giveaway! Click Here to see who won!

Search results

  1. A

    psk31

    dear friends i use hrd soundcard codec why don't i see in the waterfall my cq using free port (8) thank you for advice 73 on3bm
  2. A

    WSJT-X

    thank you for reply about "to use the feature" I put the "the call and mail me" in tx5 do i need to put it in the macro i use 2.2.0 but as i saw not a single reply i am wondering if I do it in the wright way or is there a code like RR73 thank you once again for reply ON3Bm 73
  3. A

    WSJT-X

    using FT-8 during a contact i try to send a short message in the TX-5 (tx1/tx2/tx3/tx4/ TX5 / tx6/tx7) but i don't know if it works as i receive not a single answer .Thank you for attention. ON3BM 73
  4. A

    TUNER

    THANK YOU FOR YOUR ADVICES IT IS NOT THE EASIEST WAY BUT BUILDING AN ANTENNA FOR THE 40 METER WILL BE THE BEST WAY 73 TO ALL
  5. A

    TUNER

    II use a ft1200dx an antenna 10/15./20 possible to work on 40 meter with a tuner MFJ (manual) which problems ? thank you for reply on3bm
  6. A

    fm on ft1200dx

    rig ft1200dx mode fm rx :29.600 pushing ptt freq jumps to 26.500 I read the "book" ( tone off etc) but don't see how to maintain the 29600 on rx and tx now with a split i set 29600 to 29600 which steps i have to do to have simplex 29600 thank you for your attention and help on3bm
  7. A

    wspr

    what do i wrong settings yaesu2000 and scu-17 for wspr settings audio in usb audio codec auio out usb audio codec power 33 ptt rts ptt port com 8 x enable cat com port 7 yaesu ft2000 send rate 38400 data bits 8 stop bits 2 settings in rig ok i see tx working rx no registration settings pot...
  8. A

    WSPR

    WSPR dear friends My equipment FT1200dx Interface scu-17 (yaesu) download drivers port7 installed port8 installed cat cable (transceiver - scu-17) cable 6pin (transceiver-scu-17)...
  9. A

    radiation

    like to read something about the construction, a shield to protect radioamateurs from radiation ( linears etc) some cage of Faraday thank you on3bm
  10. A

    signaLink

    solution to have the input mic/tx free and send audio from pc to the TX signaLink connect the pins in the jumper in the right way (see tigertronix signaLink) connect cable data tx to signaLink power signaLink via usb pc for ft1200 dx cable 6pin SL6PM jumper sl mod6pm or connect by...
  11. A

    signaLink

    dear Knights in the Ham i bought the cable sl6pm cable(tigertronics) when i use the 8 round pin cable /the input mic tx/ the signaLink /audio from pc /there is no problem when is use the 6 pin cable (sl6pm)/ input data (rear tx ft1200dx) no audio to transceiver from pc (led on signaLink is on...
  12. A

    split

    i use a ft1200dx i received this information a tigertronics cable sl-cab6pm into the data (back tx) will do the job another message build a Y and use a 4 pole double throw switch into a box can someone give confirmation by experience thank you wish every one who read this thread a 73 happy new...
  13. A

    split

    can I use the mic when the input transceiver (dx) is used by a SignalLink. Can I split audio/ground/ptt to audio/ground/ptt SIGNALLINK and audio/ground/ptt/ MIC and by switch( ex) using on turn one or another device or is there another way (audio mp3 and voice mic) thank you for attention , help...
  14. A

    FC-50

    i know how to hook the ARB-704 -FT891 - and the linear but where and who put i the FC-50 (100w) thank you for some diagram 73
  15. A

    cable ft891

    dear friends Can I use the cable I hook a FT1200dx to an Ameritron ( linear operations) to hook a FT891 ( is there an output for a 8 pin) also to an Ameritron or do i need another cable thank you for reply and help ON3BM
  16. A

    hooking kenw-arb-al

    thank you for your attention and advice On3BM
  17. A

    jumper Kenwood 4401 TS amplifier

    in the manual Kenwood I read about the connection to a amplifier Normaly it is off is there someone who can tell me if the pin (left) i see is the ON in the picture i think the white wire has to connect somewhere but I don't see where is this ON thank you to let me see the light picture one ...
  18. A

    hrd 6.3 and voice

    dear hams , Can I use HRD 6.3 with Ft1200dx /w10 / scu-17 with voice as hrd wrote nor all rigs are compatible (psk etc no problems) I tried (settings headphone -voice- ptt (f4) works but no audio rx/tx thank you for reading and advice 73 on3bm
  19. A

    signalink

    dear friends when i buy the signalink usb to use with FT1200dx i think i had to mention jumper SLMOD8RY cable SLUSB8R cable SLUSB6PM (rear Rig to SIGNALINK) Do i need other cables or other things Thank you to verify so I avoid to command a second time 73 ON3BM
  20. A

    TP-link

    Use RemoteHams Server/Client needs port 4524,4525 Norton open Bbox3 ( router) Proximus -Belgium blocks no way opening those ports solution TP-link behind Bbox3 Hope Tp-link more "friendly" about closed ports like to have advice on a Tp-link (wired) thank you for advice ON3BM
Top Bottom