Search results

Installing a VFO will not give you variable power. It will give you frequecy sliding capabilities though. fasteddy </p>

Ok inspector spill the beans on how this conversion is done. You peaked my interest on this one. Why would it only put out 1 watt on MURS and 5 watts on the other freqs? fasteddy </p>

Ben email me at pe765@aol.com , I will send you a picture of the board back with everything labeled. fasteddy<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)"> </p>

Thanks guys, you all are a big help. I know I sound a little ignorant, but I just wanted to make sure. Take care fasteddy<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)"> </p>

I was told that there is small portion of 10 meters that Tech lisencee's could do phone operations on. 28.305 - 28.500, is thisright or did I get some bad info. Want to be sure before I do something stupid<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/roll.gif ALT=":rollin"> <img...

Sounds like you might have some cold solder joints on the microprocessor. If you have good soldering skills, take a 15 watt or smaller iron and lightly touch the pins on the processor andgive them a dab of fresh solder. Be careful not to get to much heat on them. fasteddy<img...

Sounds like you might have some cold solder joints on the microprocessor. If you have good soldering skills, take a 15 watt or smaller iron and lightly touch the pins on the processor andgive them a dab of fresh solder. Be careful not to get to much heat on them. fasteddy<img...

Thanks Mike, I have looked for hamfest in my area, not much going on for sure. I do like the looks of the Yaesu, but if I but new I will probably go with the Icom. I have a friend who has one and he really likes it. Thanks for the help my friend, hope to catch you on the HF bands real soon...

Well if I gey setup for VHF I would love it.When I get the code down I can do HF. Lets get this going, it will be lots of fun. fasteddy<img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)"> </p>