• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. D

    Anytone Ares 2

    i just got a qt40, in the menu what is FT for ? it has either 1 or 2 , not covered in the manual, anyone can explain what it is please ?
  2. D

    ANYTONE AT-5555N2 receive noise work-around

    955 v2 have the same issue since they use the same exact board, Somewhere along the production run they made the receiver Way Too Hot "overly sensitive" or the Smeter calibration is out of whack or something, A local of mine who when I listen on my Kenwood 480 and a SPT500 gives me S9 suddenly...
  3. D

    ANYTONE AT-5555N2 receive noise work-around

    mine with same issue ends in 0402
  4. D

    Realistic TRC 453 CLARIFIER DOES NOTHING

    no deoxit went into the clarifier, i used it on the back side of board and vr controls however. As it stands now the clarifier has no effect on anything making ssb useless because everyone sounds garbled.
  5. D

    Realistic TRC 453 CLARIFIER DOES NOTHING

    its beyond an alignment, this radio is dead on frequency on am and ssb, its just the fact the clarifier does nothing.
  6. D

    Realistic TRC 453 CLARIFIER DOES NOTHING

    Yes i am positive, been in radio 35 years, the clarifier knob on this thing does not adjust the rx frequency at all, its like it is a knob hooked to nothing, it does not vary the rx at all.
  7. D

    Realistic TRC 453 CLARIFIER DOES NOTHING

    I have a trc 453, radio is totally stock, it's a garage find, deoxit on all controls and board, radio transmits and receives, has good modulation and on frequency on ssb when listening from another receiver, however.... I can not tune anyone in with the clarifier, it does absolutely nothing as...
  8. D

    rci2995dx low volume issue [help please]

    ok, now i have some good info to begin with, thank you I will report back.
  9. D

    rci2995dx low volume issue [help please]

    thanks for your response, yes i tried doing that with the PA,, same problem. other than the ultra low rx volume the radio works as it should great modulation on transmit. Just ultra low volume, i have use it but need to crank the volume to hear people, their signals are normal.
  10. D

    rci2995dx low volume issue [help please]

    I have a rci 2995 dx, not the dxcf but the dx model, It works great except all of a sudden the volume is very low on rx, both am and ssb i have to crank the volume all the way to hear people now. What is the problem with this, does the same with headphones, i have to crank the volume knob...
  11. D

    sears roadtalker 934-38260702 channel mod

    Can someone tell me if this radio can be channeled ? sears roadtalker 40, it has am/usb/lsb, its a mobil, model is 934-38260702 thanks for any information.
  12. D

    uniden 76xl cb/pa switch help

    well all i have found is joining black and orange give me rx but i have no transmit
  13. D

    uniden 76xl cb/pa switch help

    how would i get a uniden 76xl cb/pa jack wires to work, i bought this 76xl and someone disconnected the cb/pa switch i have 5 wires orange/purple/black white and pink, need help, its a nice radio but because these wires are not connected it wont tx/rx
  14. D

    Cobra 29 ltd switches?

    how would i get a uniden 76xl cb/pa jack wires to work, i bought this 76xl and someone disconnected the cb/pa switch i have 5 wires orange/purple/black white and pink, need help, its a nice radio but because these wires are not connected it wont tx/rx
  15. D

    galaxy dx 99v2 tuning pots?????

    uses the EPT690011d board
  16. D

    Low Volume

    d34 & d35 look visually ok, i work 3rd shift so my radio time is limited, i will try and check the voltage on q24 on my next day off. I did change the mode selector thinking that was the problem but nothing changed.
  17. D

    Low Volume

    will do, thanks for your help it is appreciated
  18. D

    Low Volume

    i got it and replaced c25, still the same, I peaked L3 L4L5L6, i have to crank up the volume to hear on AM, all other modes are fine, rx is good as far as the signal meter on all modes, its just the volume level has to be cranked all the way up to hear on AM.
  19. D

    Low Volume

    wish i knew the trick to finding caps on the solder side of the board..lol