• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. J

    Base New install

    I noticed today swr was flat after leaving antenna apart for a couple of days then started climbing after 2 hrs of reinstall
  2. J

    Base New install

    Im going with Antron 99 this Antenna sucks
  3. J

    Base New install

    I’m returning it might be my antenna
  4. J

    Base New install

    Sark100 swr reading was high I wasn’t using my dosy or swr reading on my radio.
  5. J

    Base New install

    I get50 ohms on my Coax during test with dummy load swr is flat 1. Calibrated the sark 100 tried the antenna agian I get 50ohms but swr is extremely high
  6. J

    Base New install

    I just got it and I only using it on my antenna
  7. J

    Base New install

    I will do a test today I’ll put a dummyload on one end and check it with analyzer will post my results here thanks
  8. J

    Base New install

    All it tells me to use a hacksaw to it lol
  9. J

    Base New install

    We’ll coax is hooked up from the sark100 to the antenna and I get a reading of 80 ohms
  10. J

    Base New install

    Ok aquired the sark100 antenna analyzer did a test antenna reads 80 ohms. When I adjust the rings goes higher
  11. J

    142gtl mystery vr pot

    White wire goes to front of the radio next to d70
  12. J

    142gtl mystery vr pot

    Thank you buddy thank you
  13. J

    142gtl mystery vr pot

    Any help would be appreciated thanks
  14. J

    142gtl mystery vr pot

    That’s not vr 12 , vr 12 is next to L8 and L9
  15. J

    142gtl mystery vr pot

    I have a 142gtl board pc-385AG .what does this vr does it’s not listed in sams photofact .thanks
  16. J

    Base New install

    Used to work from the radio don’t know what happen any help would be great
  17. J

    Base New install

    Just installed a new patriot antenna 2 stages works very well but I’m confused on the swr my 148gtl swr meter reads 3.0 and when I test the antenna to radio with my Dosey meter in line it reads a flat 1
  18. J

    President Washington issues

    Thank you for your input I will be trying what you said ,also I do have another radio and I been trying to align it to match other radio but nothing happens .
  19. J

    President Washington issues

    Yes the led is green and turns red on tx, after I recapped it did work once i used my signal generator to do the anlignment that’s when it happen, all caps have right polarity
  20. J

    President Washington issues

    Hello I have recapped the president Washington base station similar board as a 142gtl what works is tx with mic what doesn’t work is I get no am/ ssb power when I key up also pa doesn’t work as well Any help would be great
Top Bottom
Back