Search results

I thought the title was straight and to the point but I’m looking for a mod to get it swing from low dead key to max power out there was a npc mod for the quad 6 that I did and it works great maybe I’m wrong for calling it a npc mod where you add a resistor and a diode in series like done on...

Anyone have the npc mod for anytone 5555n2 would like to get a little more swing from low dead key Thanks Ed C

Thanks all for your help I got it figured out Thanks Rdc

Hello all I picked up an old minureman1 at a garage sale and it still works with good audio the problem I am having is it is continuously draining the battery. I’m sure this has been required a time or 2 I was wondering I’m anyone had a picture of the inside so I can check wiring is correct I...

I have found the problem I was following all the traces on foil side on the left side of the board there were 3 long traces coming down and I noticed there was a hair sized thickness of solder across 2 traces that didn’t look like it belonged there I just knocked it off with my finger nail and...

I pulled j14 no change I also pulled j13,15and 16 no change but the radio tx and rx work fine this is a weird one

I will give it a try and let you know Thanks Ed c

Hello all I’m having a problem with my galaxy 959b I picked up awhile back. When I hook up the radio to my power supply and radio on/off switch is off as soon as I turn the power supply on the radio comes on and if I turn the radio on/off switch on it stays on I have tried 2 different supplies...

Silver k eagle audio in mic works fine. Ets tones not working while board is installed in mic. Unmount board from mic and tones work fine at first I thought there was something wrong with the board so I took another board out of my other k eagle and it does exactly the same thing I’m thinking...

You were correct changed c95 and low and behold all tx power is back to the way it should be,thanks very much for help

Radio was working fine ,turned it on the next day and now it has no tx power on AM or SSB ,receive still works fine ,no watts at all coming out but if I hook up another radio next to and listen I can here the radio key up on the monitor radio anybody have any ideas

I just purchased an S-9 it is about 2 months old the guy I bought it from said he had a mod done that would only allow the AMt for the talk back to be a certain loadness no matter where the AMT potentiomter was set on the front of the radio,and sure as hell thats the way it operates,I would like...

Hr2510 rx good but has no tx power shows about a half watt on AM if I keep the mic keyed that half watt goes to 0 watts in a couple of seconds ,I have already replaced the final mrf497,the driver 2sc2166 also Q124 audio driver Q134 pre driver ,changed C95 and C97 and C75 ,all voltages on ic104...