So I just got it in. The Anytone AT-5555, was going to sell it quick. But decided to see the RF power myself..
No recent info really on line.. the revisions brought changes.. none really noted on newer videos.
It has mic gain in function menu IC9. It's set at 31 from factory.. goes to 61 or 64.. version 3 and less didn't have this menu..
Front RF power knob goes from 1/2w to about 12.5w on AM.. Good for low drive amps..
At lowest setting I get like 1/2w DK
At 7 o'clock I get 1.5w DK. Perfect for RM amps..
At 3 o'clock I get 12w or so. Notice 100w switch position.
I turned to about 10 o'clock for SSB mode with a whistle to get up near 6-9w carrier with modulation..
Going to hook up 203 tommorow for further testing.. stay tuned..
No recent info really on line.. the revisions brought changes.. none really noted on newer videos.
It has mic gain in function menu IC9. It's set at 31 from factory.. goes to 61 or 64.. version 3 and less didn't have this menu..
Front RF power knob goes from 1/2w to about 12.5w on AM.. Good for low drive amps..
At lowest setting I get like 1/2w DK
At 7 o'clock I get 1.5w DK. Perfect for RM amps..
At 3 o'clock I get 12w or so. Notice 100w switch position.
I turned to about 10 o'clock for SSB mode with a whistle to get up near 6-9w carrier with modulation..
Going to hook up 203 tommorow for further testing.. stay tuned..
Last edited: