• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

B&K Cobra Cam 88 Mic Plug Help

RichardHartman

Active Member
Feb 7, 2019
81
31
28
52
Hello,

I have acquired a Cam 88 that did not come with the mic.
It has a 4 pin plug but looks to be about twice as big as the standard 4 pin plug that we know as the standard now.
I have searched the web for mic plugs but I am not finding any that will work.
Does anyone know if there is a specific name for this plug or know of a link where these might be available?

Thank you,

Richard
 

Hello,

I have acquired a Cam 88 that did not come with the mic.
It has a 4 pin plug but looks to be about twice as big as the standard 4 pin plug that we know as the standard now.
I have searched the web for mic plugs but I am not finding any that will work.
Does anyone know if there is a specific name for this plug or know of a link where these might be available?

Thank you,

Richard
Richard I to have a COBRA CAM 88 and was looking for that plug for months I found one on Facebook of all the places . You can do as I did place a wanted ad in all the old cb radio sites. That's how I got mine , or you can change the old plug for a newer COBRA 4 pin plug . PS you may find one on E-bay . Good luck.
 
  • Like
Reactions: RichardHartman

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.