Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Bias Diode Boards

I think I will hold off on making large numbers of these until I get a chance to test a few other diode arrays. I can make them as is for anyone wants some, but as I showed in the video, 4148's on the back of the original board will do the same. I will get a sample of different diode arrays with my next order and see if I can get them closer to the originals..
 
  • Like
Reactions: Eldorado828, loosecannon and Cable Guy
Thought this was going to be about a different subject.

Several amps I have here (in particular, the L7 and L75) can benefit by having their bias circuitry revamped slightly. There was an EU seller of a kit which also incorporated meter protection and a few other nice-to-haves onto the same board.

Due to tariffs he won't ship to the U.S. - so I'm left to fabricate my own or come up with another pre-made source.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
  • @ COWBOYS:
    Denton GL 1000 ham amp comes on, but will not key up
  • @ COWBOYS:
    What can I do to make my Denton GLS 1000 amp to load ?
  • @ AudioShockwav:
    Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
  • @ iw7ed:
    hello


      Top Bottom