This started out as a great receive but no sound. Audio amp good, but bad C123 near T2. Now the volume is barley heard. PA Full blast works great (even before the no sound). If I turn up the signal generator I seem to loose volume. The squelch seems to work in one spot only but I can not jump it to test it.
So I have checked many parts all check good. How do I check T2 transforme? I know C123 ties directly to it so possibly the shorted Cap. has something to do with the two parts.
Shouldn't I be able to jump the squelch or am I doing something wrong?
Also rf gain has nothing to do with this problem. It will make the receive signal on the meter go up and down.
Thanks,
So I have checked many parts all check good. How do I check T2 transforme? I know C123 ties directly to it so possibly the shorted Cap. has something to do with the two parts.
Shouldn't I be able to jump the squelch or am I doing something wrong?
Also rf gain has nothing to do with this problem. It will make the receive signal on the meter go up and down.
Thanks,