• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Galaxy dx99v No leds working

LawNad

New Member
Jan 29, 2023
6
10
3
68
Frequency counter, channel, and meter backlight all went out when I switched on the +10KHz. Can anyone tell me how to fix this?
 
  • Like
Reactions: Rwb

The +10 switch itself is pretty simple. Regulated 9 Volts comes in one side, feeds out the other side to pin 9 of IC1, found on the "band" circuit board bolted to the side rail. Has to be a mechanical fault shorting that side of the switch to ground. A wire caught under a bracket and shorting to ground is what I would look for first.

73
 
The +10 switch itself is pretty simple. Regulated 9 Volts comes in one side, feeds out the other side to pin 9 of IC1, found on the "band" circuit board bolted to the side rail. Has to be a mechanical fault shorting that side of the switch to ground. A wire caught under a bracket and shorting to ground is what I would look for first.

73
Thanks, I will look.
 
  • Like
Reactions: Rwb
Okay, I've visually checked for all the above. Removed the boards and inspected. Nothing. Time to find a good tech. Any recommendations?
 
  • Like
Reactions: Rwb
Send @OldTech03 a pm. He did a great job with my 99v, it is now the main radio on my work bench in the back room.

 
  • Like
Reactions: Rwb and tecnicoloco
99 V great radios. ever now n then need a lil tlc
 
  • Like
Reactions: LawNad

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.