Issue with icom746

[aceturkey]

I turned on my icom 746 and it went right to transmit!! Tried everything I could to "undo it" but no success... I don't have the service manual
but after thinking about it could it be the "pin diode" switching??

 

[sp5it]

Without service manual and basic measurement all is guessing.

 

[HomerBB]

Manual for you.

 

[HomerBB]

Maybe check your Vox, or CW button?

 

[SIX-SHOOTER]

I would unplug any microphone or CW Key that may be plugged into it just so you know it's not one of those causing the issue.I would also do a Complete Factory Reset & see if it unlocks the carrier.Can't hurt in any case.I have an ICOM 746 as my backup radio & it's the 4th one I have owned.

SIX-SHOOTER
W4KVW

 

[aceturkey]

Thanks for all the ideas (and the manual).....will get back to you and tell you how I make out!!

 

[Moleculo]

Also unplug anything attached to an ACC port in the back.