• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

palomar 400 high drive


I would try to keep the forward drive below 30 watts pep. You could drive it with a little more but it will damage the resistors used on the hi/med/low switch and will over drive the amplifier anyway.
 
No, thats not gonna work at all. Some one has swapped in a 2879 for a 3749 and thats not a good idea. Good luck with that one. I don't even think 3749s are correct.


" That would work if the 2879 is being used to drive the 3 other transistors."

Say what?? No such thing as a one pill driving three. Sorry.
 
No, thats not gonna work at all. Some one has swapped in a 2879 for a 3749 and thats not a good idea. Good luck with that one. I don't even think 3749s are correct.


" That would work if the 2879 is being used to drive the 3 other transistors."

Say what?? No such thing as a one pill driving three. Sorry.
That would require a very large wattage resistor to balance the output stage with the single resistor, cheaper to just add another transistor.lol

Schematics shown for this amp and I believe dwb showed us 2 show that amp using either sd-1446 or MRF455 transistors so obviously it has already been modified or is another version that we've not seen a schematic for.
 
Yea, I could have stated that different since a skilled person could build something like that. It seems as a general rule amplifiers have even numbers of pills at the final stage.

Bottom line on that Palomar is none of those pills were there when it was new. I did have a Galaxy 225 once that had two 3749's.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.