Good evening members, its been a while since I have had a question but this is a doozy! As the title says I am having a receive problem. I have a Wilson 2000 trucker going to a Galaxy DX-949. The unit transmits fantastic but receive is limited to 1/8th mile and then it is full of static and almost impossible to make out whats being said. First of all I drive dump truck and we run in a line to and from the jobsite on a major highway. So...here is what has been done: I used to run twin antennas a couple years ago but went down to one and it worked fantastic so I had the spare and swapped it, no difference. Changed the radio with a spare, no difference. I replaced the coax and the stud mount on the mirror with Wilson quality products, no difference. I put an analyzer on it on channel 20, 27.205 megahertz, swr 1.14/1 @ 49 ohms. Checked continuity from antenna base to mirror, ground strap from mirror to door and all the way to the frame, full continuity. I am at wits end. I have been into cbs for a long time and have never had anything like this. As I say, transmit is loud and crystal clear but receive is barely there no matter what radio, antenna, coax, mic or hardware. Any suggestions would be greatly appreciated. Thank you.