Sams PhotoFacts Collection

[danmcclain]

Dan, Saw the alignment info for the Johnson 4740 from CB-212, thanks for posting that. Any chance I could whine at you for the schematic from that one as well? I've been too cheap to add that volume to my set.

You don't have to whine, I will scan the schematic for you.... check here in a few minutes... Dan

 

[danmcclain]

You don't have to whine, I will scan the schematic for you.... check here in a few minutes... Dan

Here you go TM86.... Dan

 

[brandon7861]

I'll see if I can find it and send it to you now...

Thank you! The time you take out of your day to scan and share this stuff is appreciated for sure!

 

[TM86]

Here you go TM86.... Dan

Beautiful. Thank you very much, sir!

 

[danmcclain]

Beautiful. Thank you very much, sir!

Glad I could help... Dan

 

[TM86]

Glad I could help... Dan

You were very helpful. Thanks to the schematic I was able to track down a no TX problem to a bad feedthrough on the board. She needs an alignment, but she's talking again.

 

[danmcclain]

You were very helpful. Thanks to the schematic I was able to track down a no TX problem to a bad feedthrough on the board. She needs an alignment, but she's talking again.

Thats awesome!

 

[Tech5]

Hello Dan!

I am looking for a service manual for a Tram Titan II, but they seem to be very hard to find. By chance, do you have one? Thanks in advance!

 

[AudioShockwav]

This may be of some help.

73
Jeff

 

[AudioShockwav]

I am getting old.... that was the Titan, this one is the Titan II.
More coffee needed.
73
Jeff

 

[Tech5]

I am getting old.... that was the Titan, this one is the Titan II.
More coffee needed.
73
Jeff

Thank you so much Jeff!!!

Me too getting old because I did not find the manual but you did! This manual will do just perfect. Tram Titan is a very nice build and good looking, but I see that it has DSB.

Bjorn

 

[sunbulls]

I am getting old.... that was the Titan, this one is the Titan II.
More coffee needed.
73
Jeff

Thanks for posting...This is my spliced together version of the schematic.

 

[Tech5]

Thanks for posting...This is my spliced together version of the schematic.
View attachment 65219

WOW! Well done!! Thank you so much sunbulls!!

 

[Dr_DX]

Dan,

Would you mind making me a copy of the Madison 8719 schematic in volume 230? Every one I have is low resolution and hard to read part #'s when I blow it up.

Trying to help a member here.

Thanks,
Dr_DX

 

[danmcclain]

Dan,

Would you mind making me a copy of the Madison 8719 schematic in volume 230? Every one I have is low resolution and hard to read part #'s when I blow it up.

Trying to help a member here.

Thanks,
Dr_DX

Let me check.... Dan