Signal generator and hp frequency counter

[kaos513]

I did use another radio that was tuned by a tech looks like it is my generator that is off not the counter.

 

[Robb]

I have that as well don't know how that will help with my signal generator.

It won't.
It will help your freq counter.
DO not use grabbers and a bnc/cable to check freq in a radio, unless you want to screw up your alignment.
That's my point.

 

[Tallman]

Use the oscilloscope leads testing your signals. Good scope probes have a switch on the side of the body for X1 or X10 signal levels. The X1 is 1 to 1. The X 10 position has a resistor divider the attenuates the signal level 10 to 1. If you put ten volts in you will only see one volt at the other end.