• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

*** Yagi 4-elements

azteca1304

Member
Jun 4, 2006
8
0
11
what antenna would you pick up? maco M104C OR SY-4 FROM SIRIO. I like both, maco made in usa, sirio from italia

untitledak6.jpg


M104C.GIF
 

4 Ele Yagi LOOK AT MOSLEYS?

Hay go to the MOSLEY ANT web site and ck those bad boy cb
antennas out,you get what you pay for from these folks.
Paul-K8PG :D
 
If you have the $$$$ get the mosely but, the maco will last along time if you do proper maintience to it ever year or two
 
Master Chief said:
The Maco is a better quality antenna. They still suck, just suck less than any import antenna! ;)
if the maco sucks what alternitive is there in a 4 element yagi. who makes the better
 
read the post a mosely, but be prepared to spend the $$$$. or make your own which isn't all that hard. and if there is problems you can bit^h about yourself for making such a lousy product and how you should be fired for putting that P.O.S. out on the market and how you will never buy another one again :LOL: :LOL: :LOL: 73 and good luck
 
go with the maco 104 take your time when building it there are a few tricks to do to the antenna that they used to put in the instructions when wilson antenna owned it. Maco dont put this info in there assembly instructions. just remeber dont over tighten any thing and put rope thru the element's this will help with viberation (no rope can cause viberation with in the antenna elements and cause the metal to get brittle and break) use lock tight on all bolts and coupler's and you should be good for a long time

hope this help's ya 73's
 
The 'problem' with 'SIRIO' is that they are just not built very much like a 'tank'. Won't/can't say anything about their performance, just that they don't 'do' well in tornados... or maybe it's the 'windy' content of the signal they radiate?
- 'Doc
 

dxChat
Help Users
  • No one is chatting at the moment.