Thinking about installing the following board. I have never installed anything on/inside a cb before. I have installed car stereos and amps, so I'm ok with wiring as long as I have instructions. As you know the 980 is a 6 pin, but I am using the adapter to connect a Ranger SRA 198. Any help would be greatly appreciated. I have found the following pin layout on another forum, if someone could confirm:
PIN COLOR FUNCTION
1: Yellow Audio HOT
2: BLACK RX switching
3: RED TX switching
4: N/C
5: SHIELD
6: 7.8VDC (as-found on this pig-rig) phantom power for power mic*
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/283503543799
73
575 in Dallas
PIN COLOR FUNCTION
1: Yellow Audio HOT
2: BLACK RX switching
3: RED TX switching
4: N/C
5: SHIELD
6: 7.8VDC (as-found on this pig-rig) phantom power for power mic*
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/283503543799
73
575 in Dallas