Search results

On the Stryker 955v2 the main circuit board where the mic jack plugs into.I know there marked 1-4 on the board it self now 1 is that still audio.

Trying to figure this out the only way I can get my swr ch1 1.2 ch40 1.3 I had to turn my rings all the way up this antenna is 1 year old I know different company makes them but maybe defect.Looking at.some other antennas kind of limited to what I can put up was thinking something lighter weight.

Question I pick up a ic 756pro now it's the Japan version is there a difference as far as the mars mod I know there all made in the same place.

Question on this 69ffb4 when I have it hooked up to A99 I get higher swr on lower channels 1.8 now if I hook up my 98vhp or any other radio it's at a flat 1 would that be due to the amp section in this 69ffb4.

Question picked up a 2995dx with the MOSFETs in it what is pep on these I'm getting about 50w Am and 20w sideband came with a UTB board in it but doesn't work might take that out I had one years back it had the 2 pills in it and that did about 190w pep.

I heard years back if you have a radio with MOSFET don't run it in a tube amp is that a bunch of bull.This was about 20 years ago

Question check this out more I found ic3 chip the 6th pin in from the left not attached to board shouldn't they be all attached

Picked the turner ssb+2 up now it is wired for a 5 pin want to put this on my cobra 2000 after looking at the wiring Pin 1 white Pin 2 shield Pin 3 red Pin 4 is a jumper that goes to pin 2 Pin 5 black I'm just wondering about pin 2 and 4 is this correct

Got this radio 2000gtl now needs work waiting on the new caps to come and audio chip.But this has extra channels in it I want to remove now with this mod to remove it's just the 2 wire on the 8719 I seen a pic online it showed 3 wires on the 8719 plus the ground but is what I want to know with...

Question on a DX2547 the tone control I know is for RX only is there a mod for this on TX side to put some bass in TX.

What would be a good radio for a Palomar 600 was thinking a general Lee but was told that radio would be hitting the amp to hard.

Question I got a Stryker 655 HPC went to turn it on and no power.I didn't start look at it yet but you guys have any idea on what I should look for inside.

Had this anytone quad 6 radio sent out twice still seems to get really really warm.I don't like that would like to get the 13n10 taken out and upgraded.Anyone know of a good shop to do this.

Any of you got a Stryker sr-94hpc and what kind of out put you seeing.I was read all over even Stryker web site say this radio is 45+w well I see 35w set on a 10w dead key 20w on a 4w dead key and this radio came from a well known ham shop in Indiana and was to be so call pro tuned lol

Question my Anytone does about 75-80w now when I'm.talking it drops down to about 50w and holds there on high this thing had a 19w dead key I drop it to 10w.I don't know what's going on it was tuned right after I got it I had sent.it out but never had.this happen before I have all new.coax swr's...

Got my power cord ts-690s. Now this didn't come with a mic. I want to wire up a 636L for now till I find a good mic for it. Anyone know the wiring info for the Kenwood ts-690s so I can wire up the 636L?

Just picked up a Kenwood TS-690s now doesn't have a.power cord anyone know where I can get a replacement.

Ok selling my 98vhp upgrading my stuff 420.00 for radio.Its clean if you want the power supply that goes up to 15v that's 50.00 more

Looking to buy 10-160 meter hf rig let me know if any one has one for sale or what ever

Getting my antenna set 1.0 from ch 1-39 but 40 is at 1.5.But trouble went to 38 LSB with no modulation seems I'm getting a carrier it throws my High swr warning on my Anytone AT6666 I just wonder if the guy that tuned done something or it got bumped and something came out of adjustment I been...