Search results

Wow! Has anyone seen the cost of those EGO 56 volt / 5 and 10 amp hour batteries?

AnyTone AT-5555 Plus and RETEVIS Ailunce HS4: $275.00 + shipping for both radios. Radios will be shipped in factory boxes inside a shipping box via UPS. Shipping box size: 17" L x 13" W x 8" H. Weight: 12 Lbs. Preparing to buy a new ICOM 7300. Also: RCI-2995 DXHP with 11 meter conversion...

For those who are not aware. On Page 7 in the User Manual, the RNR option is not listed / identified, but Menu Function No. 9 in the radio is the location of the menu to adjust / set the desired noise reduction level from 1 - 5 or Off. I know of three out of three HS4 radios and User Manuals...

Fat Cat 4-Pill Mobile Amp with 48" power cords. I am the original owner. I purchased this amp in July 2025 for a friend who did not have the funds and he recently informed me that he does not want the amp. For test purposes, I connected the amp to my AT-5555 Plus. With 30 PEP watts out of the...

Has anyone ordered / purchased a radio from MOONRAKER in the United Kiddom?

For those who are interested, this is a photo of the end cover identifying the two versions of the new version of the AT-5555 Plus and Plus N. I have not located a sources for the "N" version.

ASTRON 70 Amp power supply set at 13.8 volts. Also connected an external volt meter to confirm 13.8 volts going into the radio. I set the menu to display the DC Volts when depressing the mic. Depressing the mic indicates 13.6 - 13.7 volts. Using the radio for two months with no problems. RF...

My friend just dug-out an old TRC-457 and sideband frequencies are slightly off. Any idea if there is a way to help him adjust the frequency without having the required test instruments? Thank you.

My new radio works great with a 1.5 watt dead-key driving a 1 X 4 amp. Out of curiosity, I managed to access the Service Menu but has anyone managed to interpret the (confusing) digits and letters? Is there a cross-reference chart?

I am the original owner. With the exception of the 11-meter mod, the radio is naked and unmolested. Clarifier is factory locked and limiters have not been disturbed. RF Power: 2 - 10 watts. 2 Watts = 30 PEP watts. 10 Watts = 115 PEP watts. I do not tinker / disturb radios. I am slowly slimming...

What is the procedure to edit my post? Thank you in advance.

I received my new AT-5555 Plus set-up as I requested. Verified RF watts with my Bird Model 43 wattmeter with a 50 watt element / slug. 2 - 10 watt carrier. 2 watts = 20 PEP watts. 6 watts = 38 PEP watts. 10 watts = 48 PEP watts. I'm leaving the carrier set @ 6 watts. Modulation was factory-set...

My long-time personal USMC friends living in (way-up) Northern Maine are moving to Laconia, NH in September. They are getting back into the CB world and are seeking a decent and honest repair shop either in the lower area of Maine or in Central New Hampshire.

Passing-on information to those who aren't aware. The standard Gamma Match for the MACO M103, M104 and M105 is rated for 2000 PEP. There are four upgraded Gamma Match units available. MACO 2600, 4600, 5600 and 6600. Something to be aware of if you order an antenna and intend to induce more than...

Preparing to assemble and install a MACO M104C antenna. Would wire rope guy wire interfere with the transmit and receive? Should I use Dyneema Rope for the guy lines?

Is VC1 the item to adjust the frequency counter to match the frequency? If it is, where is the location on the board?

In the process of installing / attaching NMO Antenna Mount to luggage rack rail on driver's side.

Sharing my Home-Brew project. Try this for installing a small radio in a tight area. LIDO Cup Holder Mount with a Uniden PRO 510XL. I removed the speaker to install the mounting plate to the speaker grille and reinstalled the speaker. Using the bottom cover (speaker side) to mount the mounting...

I feel like a "CB Dummy " but I will disclose / admit my ignorance for not reading Page 15 of the User's Manual. I was not aware that RCI ships-out these radios with the 12v Power Cord with the RCA Phono plug for the external fans not being inserted into the 12v socket at the back of the radio...

New amp arrived and I was curious as to what type / name of the pills were installed. I removed the cover and found two defects as per the attached photos. Both cables are not secured to prevent them from being pulled-on the soldered connections. Any idea what the floating thick washer-looking...