Search results

LMAO ...I thought there was an END! ..lol

it does..I have the same one :)

ya dude as was said you can find a EXPO kit for that but it ain't worth it... the pll will do the same thing as the expo kit now some radios with a expo kit won't jump all over when adding for channels...if that was what your after...but on this unit it don't matter the price of 2 switches and...

hello doctor 2 questions :P does the insides have VR6 VR10 and VR12 in it and the PC-385 Board?

well my pal did his up like a quad and had them 1 foot from the tower bottom :) and sunk in the ground..

cool thanks will keep the info for the future ...I picked one up from fatboy with a meter :) runs 2 LN 200 amp alt

a 30 foot limo ...well if you can afford that then you can afford the gas and parking...else you wouldn't of bought it...right? right! bigger is better still stands as in the bigger they are the harder they fall :P the bigger of them gets the woman(or is she a woman worryied only about that)...

ok maybe i wasn't clear on this try moyerelectronics good peeps there and will guide you in the right direction meaning you have to email them :) on what you want

ya maybe for a mobile dude! most bases are 18 pin 9 pins each upper/lower try moyerelectronics good peeps there and will guide you in the right direction :)

yeppers, if i had a red ground in my radio I look for major rigging :P

I aint even going to bother looking freecell :P

Grant XL 1. Add a 1.5 K resistor on to the middle leg of Q24 (cut the track and bridge with the resistor) 2. Replace R126 (10k) with a 4.7k. 3. Replace R124 (10k) with a 4.7k 4. Re-tune coils L37 and L38 for maximum forward swing on AM mode. MODULATION: Remove R131 AM POWER: VR10 SSB...

:)

:)

damm made my shed a tear :) but just wondering who opened the mail to reply to this...hm daddy????

well how are we to do this if the board number is different post a pic or a number...:P is that a XL(8719 pll) and is AM POWER: VR10 (check that)

not a problem :)

For The swing kit Unsolder one end of R238 and solder a 1N4001 Diode {the unbanded side} to the resistor then solder the banded end to the circut board where you removed R238 from and then check out the swing and audio TR32 or VR14 AMC VR12 SSB ALC VR13 Hi Pwr VR16 Lo Pwr L33 Tune For Max...

swing mod(lowers the deadkey and keeps the maximum pep)...and shouldn't that be the same as a 200GTL but no sideband? never mind found some stuff Cobra 87GTL, 89GTL, 1000GTL Remove C128 (.47uf) & TR16, Change R132 (1k) to a 470Ohm,Change C61 (220pf-NPO) to a 270pf-NPO, Change R50 (3.9Ohm)...

:)