• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. B

    general lee troubles

    ive got a general lee tx is fine rx works but when a strong signal come in the meter pegs out and wont recieve but you can key the mic and everything is back to normal until a strong signal comes in
  2. B

    stryker 655 v3

    i dont know about v3 but its different than the previous ones
  3. B

    stryker 655 v3

    does anybody know how to convert to 11 meters. i just bought 2 . ive had them before and just cut white wire, these dont have wire.
  4. B

    new road king radio

    i have and wont buy anymore
  5. B

    Newer Uniden PC78LTX/LTD radio

    ive been looking too cant find anything all i know dont buy uniden
  6. B

    new road king radio

    i have a new road king radio. it is one with the surface mounted chips, and the receive has got real low,i cant find any schematic for it does anyone have a idea what to do. I changed the audio chip,and the caps close to it but didn't help
  7. B

    no Dk

    no its not a mic it talks fine but it will not have a carrier, on low or hi nothing but it will modulate
  8. B

    no Dk

    ive got a connex 3300hp and ive tried a bunch of different things but no dead key.the radio will modulate but no dead key anyone got an idea?
  9. B

    Stryker 447 hp

    It will transmit when I touch the probe to the transistor
  10. B

    Stryker 447 hp

    I can take a meter probe and get Rf when I touch the probe to tr 914
  11. B

    Stryker 447 hp

    I’ve got a 447 I’ve checked the finals and drivers and no transmit the AWI is flashing recieve is fine but no tx
  12. B

    new connex 3300HP

    I found the problem even though it was new and the finals were new. they were bad. I checked them with a peak transistor checker and they checked good but they were low. So I changed them and now im back to full power.
  13. B

    new connex 3300HP

    I have a new connex 3300 right out of the box . will not dead key but 5 watts and only swing about 10 watts what should I do
  14. B

    no modulation

    done tried it still don't work
  15. B

    no modulation

    ive got a brand new general lee just took it out of the box. It has no modulation on low power,ive checked the pots for low power . It keys up fine got good carrier on low power but no modulation.It works fine on hi power,got good modulation on hi power.but no mod on low power.
  16. B

    galaxy dx 88

    ive got a galaxy dx 88 and the frequency counter don't work. Ive changed r37 and the frequency counter pcb,checked the power , does anybody know anything else.
  17. B

    squelch problems

    I HAVE A cONNEX 3300 ZX AND THE SOUELCH DONT WORK.Ive changed the transistor at tr 16 didn't change a thing.what else could it be
  18. B

    cobra 29 meter

    thanks ill try that
  19. B

    cobra 29 meter

    i have a cobra 29, everything works fine ,but the needle wont move on tx it will on receive but not on tx. anybody got any ideas
  20. B

    connex 3300 FHP

    does anyone know where I can get a small channel selector for these radios it fits on the EPT900051z board
Top Bottom
Back