Search results

I have replaced with original np arts I used the dx11b.schematic from cb tricks

How do you do the RWOB Mod? Thanks. For the info what is strange I have change almost all parts in the Rf section. Finals. Caps resistors even new trim pods. And still power. Is about 25/30pep it use to be 40watts plus on Ssb and Am

Can. Someone shed some light on modding the galaxy Saturn to mosfets. U can state the pros and cons.my Saturn when from 15rms to about 7rms I have have finals capacitor diodes Etc been at it for 2yrs. If I change to mosfet may it change the out put?also typical output of a dual final. Galaxy...

Hello looking. For a pride dx 300 relay

Where can u get a pride dx 300 relay or silimilar replacement

I have cobra 2000. Which belongs to a friend.he mentioned he got a small shock. From this radio.I experienced it also but not sure what could cause it. Ur it happen a few times I assume something is leaking where should I start

I will try to locate c67 ..

The radio has no mods. The signal meter still moves just the audio goes

I have a. Cobra 2000 I just. Realize when I flip AnL. To off my receive goes silent no audio if I switch it back on it works. Fine any ideas. As I know it’s. Not working as should

I have gotten the power between30/32 watts ssb and 40watts Am What I have found which I never paid attention to the radio is transmitting on frequency but on the counter it is a bit off in the frequency display only on Lsb Ssb Am is fine .I tried the ssb adjustment but even when...

I saw another saturn today that has capacitors at the bottom that mine doesn't have.Please see photos ..any explanation??

I was going through the radio I found (2)caps replace c195 1000uf change to 4700uf and c194 1000uf change to 3300uf should that make a difference

I have dome all this my power on the arm I'd about 40-42 WATTS AM AN 25-30 SSB IS THAT NORMAL OR SSB TOO LOW?

Thanks Andy No I don't want the Saturn Hifi I am happy with a descent working radio..so do u sugguest changing R231 R232 if so should I use theschematic value or ???? Should I change the AN612. I will follow your lead

See photos

Look at the diagram C170 - 560pf C210a-.047uf C505- ,.O1uf U mentioned 2 capacitor they are actually 3 I should have given the values..look at pictures I uploaded

Any particular parts to focus on..I adjusted the bias and the dimming went however as stated before Am power is about 40watts and 16/18 avg. watts bird 43. I will send u a picture of the first saturn I had and it has 3 capacitors on the bottom

I have a similar problem I am seeing 40 watts Am but 20-25 watts Ssb and a slight dimming I have own Saturn's and 2980 and the output was 30+ on ssb.i Am a bit lost as the Am is fine ssb is low I have adjusted L40, L42, L43 and L44. Also I have adjusted v12 no change Where should I look.i...

I have 2 Saturn's one has some disc capacitors on the soldered side 3 to be exact. C170 C505 .... however I have seen another which doesn't have them. What is strange the Am power is 10dead key andswings 15-17 rms 40 pep but I am only seeing about 20-25 watts I had one before which...

What is the correct or mostly used measurement for build a multiband dipole already have a 4,1 +1:1 balun.. but am seeing different measurement..also how. high from the ground I read 40ft a d each end 10ft. I currently have one but awful swr on 80m .whe n I test the balun with a...