You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Ok, best I can remember the filament voltage is mostly isolated from the rest of the radio simply meaning there is either a break in the voltage supply or the heater switch is faulty or there is an issue in the AC line plug that connects pin 9 to pin 11 which in turn delivers the 12.6 vac to the...
Does it Receive?
The reason I ask this is because there should be an accessory plug in the back next to the SO239 antenna plug if it's missing it will not allow the tubes to get filament voltage if the seller is a tech he may have done a cold neutralization adjustment and forgot to put the plug...
I have worked on hundreds of these over the last 50 years but when you say shipping damage what are the problems physical/electrical or both? I'm in Iowa just for the record.
Well, I read through its entirety and really didn't find any factual errors it's pretty straightforward forward I have been repairing since about 1969 and have with maybe a few short years in the commercial field but it seems pretty accurate. Of course, one could argue that there is much more...
Citizen Band (CB) radios have played a significant role in communication over the years. These radios, operating in the CB radio spectrum, have been used by people around the world for various purposes. In this essay, we will explore the history, uses, and impact of Citizen Band radios.
Citizen...
Well, you can't even begin until you reinstate control panel voltages and get the displays working and when you do you may find the radio coming back to life. You may find a bad connection or switch or something but first fix the lights.
So is the noise the fan or is the noise there when the fan is turned off and then when you turn the fan on high the noise increases? If you have any ground looping in the antenna system or the DC power distribution those will all add to the issue. Now if the alternator is the issue and any of...
How do you know the alternator is making the noise?
Next, it is very hard to control noise being generator by using a long wire with a suppressor that far from the Alternator if there were any chance of doing that it would most likely need to be done at the alternator.
I assume the noise you...
Ok I usually only make 1 mistake a year that was 2 mistakes unless I'm counting wrong then it could be 3 mistakes, but in my defense, I don't really care where he is I just remember watching one of his videos after being made aware of his channel and I never went back for more.
There are factors that can cause what you are talking about some of them are simply that the buffer stages in some radios are just dirty IE harmonically and although all IF and mixer stages in low-end radios IE "CBs" can be dirty you will most likely see a lot more of this kind of issue with the...
If you use the schematics it will give all you need to know. The cap is in sections that usually have different values of capacitance but in the Tram version, I believe if memory serves me well these are all rated at 40uf @ 450 VDC and that value is specific to the circuits shown on the power...
Well, you obviously should spray the volume control and make sure it's clean this radio is an antique, and if it was recapped make sure C79 and C81 are installed in the right direction or polarity just some things you can check.
I would say send it in but I have at least a 4 month's backlog and patience would be a very good quality to have. I do try my best to look at all that is here and of course, some units are waiting for parts and others are restorations that take as much as a week or more just the nature of the...
Well, I remember in the good ole days when the FCC had certain requirements for a CB to be on frequency now this was before PLL circuits and OCXO'S and TCXO'S were not used in any old tube CB radios and the frequency tolerance was to 20hz one way or the other and the test equipment produced for...
I recently purchased a new F150 love this truck it's the 500HP version it's an all smiles and fast miles anyway I installed both the 2 meter dual bander along with a 2 meter dual band antenna on one side of the pickup it's mounted to a window bracket I made and the 11 meter antenna is mounted on...
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.