• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Search results

  1. C

    Icom IC-V8000 TX Mod from 136 to 174 MHz

    programming the + and - on screen at same time for it to work...any ideas?
  2. C

    Golden Eagle "Key-up "

    I have a mark 3 ... it has a 80 mfd in it. The ping is real weak. Squelch down and volume up. But its weak..even with a power mic. Audio is loud .. the r38 is almost wide open. Ping not loud..like squelch is is up and its not getting the strong volume it needs. Just want it nice an strong like...
  3. C

    Yaesu FT-2000 11 meter modification.

    Are the any good settings for am? All I've tried sound really bad.
  4. C

    Kris Mach 3 low watts

    What can replace the 30 mfd 500 volt caps. Can't find any. Thanks
  5. C

    Imax 2000 and SWR Issues

    I'm having the same problem. I have a large tower, guyed below the top section. 7/8 heliax, small jumper to antenna. Added 50 ft to get a lower swr.Never had to do that before. Had the same set up on same tower, only difference is I added a longer mast and a ground plane kit. Radio hears ok...
  6. C

    Dak Mark X problems

    I have a Dak Mark X got on a trade. It will not transmit. R213 is blown and need to know what size it is. Also directly behind the 6dg6 tube is a small board with a choke on it. the small resistor is blown and I can not find out what it is. Any help would be appreciated.
  7. C

    siltronix 1011c transmit on cb mod

    :headbang Does anyone have the info to make a Siltronix 1011c transmit on cb? I have a really nice one, but it has a few issues. Would like to maybe find a tech that can fix it. Its super clean. If you know of someone or have the mod please let me know. Thanks Email copclyde44@hotmail.com