Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

6 Meters is OPEN

OPEN again today...from IND
MEXICO (3 contacts)
N.MEX/TX/MO/MICH/FLA/LOU... and many more!!!:whistle:
TEXAS has been open here since 9:00 AM EDST...so if you live in TX and was not on...You missed it !!! :)
The band acts like it's going WEST...
So if not on 6 meters you're missing out...:rolleyes::D
What a FUN BAND
All the Best
Gary
 
  • Like
Reactions: wavrider and Christopher17
BJ radionut said:
OPEN again today...from IND
MEXICO (3 contacts)
N.MEX/TX/MO/MICH/FLA/LOU... and many more!!!:whistle:
TEXAS has been open here since 9:00 AM EDST...so if you live in TX and was not on...You missed it !!! :)
The band acts like it's going WEST...
So if not on 6 meters you're missing out...:rolleyes::D
What a FUN BAND
All the Best
Gary
Click to expand...

I missed it because I was too lazy to assemble my 6m mag loop until last Sunday, but I'm ready now
6m_mla_600.jpg
 
  • Like
Reactions: Slowmover and BJ radionut
Maybe I will get lucky and actually hear an opening during the winter Es season. Just have an end fed halfwave up at the moment for 80-6m. Sixty feet vertical and about 70 feet horizontal with a homemade 49:1 balun with three T240-52 type toroids. Need a tuner for 6m as it resonates around 51.6 MHz.
 
  • Like
Reactions: Rwb

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom