Anytone 6666

[Stuck in the mud]

Does anyone on this forum know anything about the anytone 6666 Mine when you key up is saying DC LO It also has Q45 & Q46 finals blown.

https://simonthewizard.files.wordpress.com/2020/10/schematic-at6666-team-1012-crt-9900-v3.pdf

 

[S&W357]

Only thing I know about them is that I have two of them.

 

[Shadetree Mechanic]

Or just look at the date it was posted.

 

[Shadetree Mechanic]

I should not have to you sell your stuff you should remove your old junk post from the form lazy people after selling your junk!!! Hoo is the staff team that should be removed junk post looks like they DONT care about this from !!!!!

Ok

 

[Stuck in the mud]

Or just look at the date it was posted.

Not real sure what you’re trying to say

 

[Stuck in the mud]

Ok

Not real sure what you’re trying to say here either

 

[AudioShockwav]

Someone pissed in the new guys corn flakes I guess.
oops he is not a member any more........
First day on a new forum and he had a real bad attitude, I think Captain gave him a time out.

73
Jeff

 

[Cabover Bob]

Saw that coming......

 

[guitar_199]

I'm lost.....

 

[Shadetree Mechanic]

Most of it got deleted.

 

[AudioShockwav]

There was a " new" member who started off on the wrong foot from the first post.
His posts have been removed, and his membership here has been terminated.
( he was not being a nice fishy)

73
Jeff

 

[Mark A Bradley]

Or just look at the date it was posted.

I know what he is trying to say,S5tuck in the Mud. I own a Anytone AT-6666, and it is going back today or tomorrow. The audio, and the 50 Watts of power is more like a stock mike and 3 Watts of power. These radios area nice piece of equipment, but this is the second one I tried ,and apparently, no third try.
Has a terrible sounding Modulation, and the more power you give the radio, the worse it gets, sounds like your overdriving a Amplifier.
So, STUCK IN THE MUD, throw that radio in the mud, the Rig looks nice, but the performance is garbage.
Hope I am not out of step, but this is the way it is, Thank you for Posting my answer, at to all, a good day.

 

[TIN_CAN]

I know what he is trying to say,S5tuck in the Mud. I own a Anytone AT-6666, and it is going back today or tomorrow. The audio, and the 50 Watts of power is more like a stock mike and 3 Watts of power. These radios area nice piece of equipment, but this is the second one I tried ,and apparently, no third try.
Has a terrible sounding Modulation, and the more power you give the radio, the worse it gets, sounds like your overdriving a Amplifier.
So, STUCK IN THE MUD, throw that radio in the mud, the Rig looks nice, but the performance is garbage.
Hope I am not out of step, but this is the way it is, Thank you for Posting my answer, at to all, a good day.

Mabey you got a bad apple? I have 2 of them and a ss9900 and they all work and sound great with the stock mic.

 

[Shadetree Mechanic]

I have a 6666 and it is a great rig, transmit sounds real clean. The receive has too much hiss to listen to comfortably. This radio was out of the box, so maybe an alignment would help. Or maybe there is a way to do the alignment so you end up with less noise, I am not sure.

 

[WECSOG]

I have one too, and it works great for me. The only thing I'm not crazy about is that you can't do channel steps while being able to see the freq you're on. I have a new Lincoln II+ that I'm probably going to put in my truck to replace the quad 6, primarily for that reason.