I don't remember exactly but I'm do remember thinking that it would be ok on an rm203.What's the lowest DK it will do?
What's the lowest DK it will do?
Apparently with power down at 2w the unit does about 3 1/2w with audio tone introduced.. just saw a dw video where he does overview.. with it all the way up is a 12w dk and 50w or so with same tone on AM.. so I am speculating you could dial in the RM203 (or other amp) to get your desired 'amp' dk. Per say 30w or so on the 203 for an example..
Thanks,
I adjusted DK to 3/4 AM, SSB to 12 watts pep. Driving my TS DX-350. Seems to be working fine. I'll check amp output later.
Anytone AT-5555n
Yeah. If I had the power up to say 3w AM would start at like 7-8 on the TS meter. Dropped to where it said 6on dk for AM and it seemed to work better at say a loose 200w or so..I'm getting around 8 with both modes. Probably need to lower it again. I'm just being lazy today. I best put meter inline and test the right way.
Yeah. If I had the power up to say 3w AM would start at like 7-8 on the TS meter. Dropped to where it said 6on dk for AM and it seemed to work better at say a loose 200w or so..
Sounds like it's good. I don't think your voice hits the high numbers do they..Getting 150 pep on AM with a tone. SSS is 250 pep.
Think I'll try to get 125 on AM and 200 on SSB and call it good.