Galaxy DX2547 No Receive Audio - GNF affect

[Chris Lawrence]

I’ll contact Galaxy and see if they have a part or I’ll look at Barkett Electronics @ GoldenEagleRadios.com.

 

[Chris Lawrence]

Will have to see if it does the trick. I’ll let y’all know. Thanks for the help.

ANF / GNF IC Assembly Complete DX959 and other models

ranger radio parts, connex replacement parts, galaxy radio parts, superstar radio parts, cb radio repair, amateur radio components, replacement knobs, replacement switches

stores.goldeneagleradios.com

 

[Handy Andy]

While that card is out, you already know the Audio section routing works, make sure the power lines to it are also correct and supplying the right voltages to make the board work.

If they are not right, then you have to fix that - else the problem can occur again.

 

[Chris Lawrence]

Finally had a little time to check this out. The new part did not resolve the issue so I need to start checking voltages etc. will update.

 

[Chris Lawrence]

Well, that was easy. J413 was plugged in backwards. The nf board was only receiving power when the galaxy noise filter button was pressed.

Thanks alot guys.

 

[Shadetree Mechanic]

Well, that was easy. J413 was plugged in backwards. The nf board was only receiving power when the galaxy noise filter button was pressed.

Thanks alot guys.

Glad you figured it out.