-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Highs
- Thread starter Ziploc
- Start date
Solder capacitor between audio input pin and ground. It will cut high tones.
Value is experimental. Choose that one which suit you needs.
Mike
Value is experimental. Choose that one which suit you needs.
Mike
C69 by TR18 and TR17 in the middle of the board is the factory cap going to ground on the mic input. It is .01uF (103) stock. As sp5it says value is experimental. Try a .022 and if you want even more attenuation try a .047 or a .1uF.
If you meant on receive, make C134 higher in value.
If you meant on receive, make C134 higher in value.
The modulation transformer in a comp 29 has a lot more DC current going through it than a stock rig. That really limits the amount of bass it can handle. For more bass I would reduce the DC current flowing through the mod iron look into modified Heising.
Shadetree Mechanic
Delaware Base Station 808
Shadetree Mechanic
Delaware Base Station 808
Ok let me dig through my notes when I get home from work. What mic are you running with it?
- No one is chatting at the moment.